This is our first practice test for Microsoft Exam 70-410: Installing and Configuring Windows Server 2012.
We will continue adding practice exams and questions as long as people appreciate them.
Each time you run the exam, it will ask you 25 questions from the database of questions.
Enjoy — and please share your feedback in the comments!
Barry
17 out of 25 first time through. Still need a little work. Thanks for having this test!
Babu
Good but I need to work on Powershell………….
sanjay
Excellennt
Suraj
It went well, but Still i need to work on Powershell and some Short-cuts (Commands)
Rogernav
Easy my backside…LOL
Rinus
Congratulations – you have completed Installing and Configuring Windows Server 2012.
You scored 12 points out of 25 points total.
Easy! haha
Jace
Nice free little test thanks
If you are considering taking the exam then you need to study more than you think you do.
I have failed the exam four times now, even though I was getting 90% on mock exams from Mindhub.
I was also getting 90% when using the test exams from the guide I bought.
You have to know a lot about powershell commands and various obscure setting in the all the subject areas it covers.
Emmanuel Avevorh
Congratulations – you have completed Installing and Configuring Windows Server 2012.
You scored 20 points out of 25 points total.
Been studying for 2yrs now and I ain’t joking. xD. well more like 2 months.
Emmanuel Avevorh
Some said these are not close the real MCSA exams and even though I agree, these are great for practise and learning purposes.
John Smith
I took the test in April and failed. I am taking it again Monday. My experience the first time around is too use multiple study tools. No individual tool will get adequately prepare you. This exam is one of the tools I am using and I hope to see a practice exam for the 70-411 in the future.
Linda M
Congratulations – you have completed Installing and Configuring Windows Server 2012.
You scored 10 points out of 25 points total.
(At least I now know where I have to focus more. Hyper-V!!!
KHUTSO ANDREW
LOL to be honest, i didn’t study as yet so i’m not complaining with the 2/25 i got. i guess i will have to study and to study hard.
Great test 🙂 i love it.
Ram
These question were very helpful for preparation of the exam.
Laurie
Congratulations – you have completed Installing and Configuring Windows Server 2012.
You scored 13 points out of 25 points total.
I have only been studying for the 74-110 for about a week. So, I clearly have more studying to do.
I want to thank for this website. It is very ON POINT in its span of the Windows Server 2012 subject matter.
This is a great site to measure sensitivity points. The questions are thorough.
Clement Babs
Congratulations – you have completed Installing and Configuring Windows Server 2012.
You scored 14 points out of 25 points total.
Gotta dedicate more time studying – I need to grab the bull by the horns !
Clement Babatunde
In need of consistent studying – couldn`t make 10 out of 25, great study material and eye opener !
Enginez
Congratulations – you have completed Installing and Configuring Windows Server 2012.
You scored 18 points out of 25 points total.
Good questions!
Lewis
How many logical processors are supported by Microsoft Windows Server 2012?
a) 256
b) 320
c) 640
d) 1024
I would change this question to specify with or without hyper-v (see relevant technet article)
Windows Server 2012 Maximums
Windows Server 2012 x64 with Hyper-V Enabled
•Windows Server 2012 Standard Edition supports up to 64 sockets and up to 320 logical processors
•Windows Server 2012 Datacenter Edition supports up to 64 sockets and up to 320 logical processors
Windows Server 2012 without Hyper-V Enabled
•Windows Server 2012 Standard Edition supports up to 64 sockets and up to 640 logical processors
•Windows Server 2012 Datacenter Edition supports up to 64 sockets and up to 640 logical processors
Anjelo M
You scored 21 points out of 25 points total.
Alex
These questions are nothing like the real 70-410 questions,the real ones are more complex and scenario based and there are no questions about the different versions of win server 2012 as it is irrelevant,i know because i recently got my MCSA (70-410+411+412),so don’t even look at these as an indication because not even one of those will be on the exam.
Jason
I’ve seen the Transcender practice tests and they seem very complex compared to what my book instructs and this test indicates. Are there some tests you’ve seen that are closer to the real test?
Aaron
so true hey
These questions are not on Administrative Level for MCSA.
Enginez
These practice exams are on point. it is also a good learning platform. I salute you.
David Shaw
Thanks for putting in the effort to do this – really appreciate it.
Any chance of questions for 411 and 412?
Lee Oh
Can anyone tell me, are these the actual test questions? Thanks in advance.
Albert
They seem to be pretty similar to questions on Mastering Windows Server 2012 R2 in my opinion.
Also, questions from here that are not on the book, reinforce some material that you might of skim through or forgotten. Good Luck.
anon
Of course they’re not. Stop trying to cheat
Sanjar
You scored 20 points out of 25 points total.
Its good?
Ambalica Bhowmick
You scored 12 points out of 25 points total
– I was planning to give the exam this friday, but i’m scared now?!?!
Jessa
How did the exam go? Were the questions similar to the ones in this practice exam?
Azmi
Have you completed the Exam? If you had completed, then can you share how accurate is this practice exam?
Sanjar
You scored 10 points out of 25 points total.
i dont now win server
aditya
thank you so much, just started reading 70 – 410 and wanted to test how much i have grasped. Thank you so much, need to go back to certain sections. god bless u guys
Tapas Pal
You scored 15 points out of 25 points total.
need to learn more
Mariyan Anjelo
You scored 21 points out of 25 points total.
Manuel Gutierrez Garcia
14/25 Not Bad
Zarco Tepoca
yo igual, pero no es suficiente D:
Mariyan Anjelo
17 points out of 25 points total. -_-
Kektklik
11 out of 25. Not bad for dropping the college course 8 years ago (figured I didn’t need it to graduate).
Manuel Gutierrez Garcia
7/25 🙁 i need to study….
Manuel Gutierrez Garcia
Today 16/25, not bad, but i need to still studing.
Jim Luft
13 out of 25. At least 2-3 of those questions I should have known the answer … damn syntax. The rest were all new to me. MORE STUDYING…. What is everyone using to study? Im using CBT Nugget videos to prep for the 70-410
sifundo ngubane
i got 9 out of 25 ..Jim luft i need the videos you are using
please share i will right an exam in 2 weeks time and i know nothing
Corey Hodges
What PowerShell command would you use to convert a Windows Server 2012 Server Core installation to the full GUI option?
1) Install-WindowsFeature Server-Gui-Mgmt-Infra -Restart
2) Install-WindowsFeature Server-Gui-Shell -Restart
3) Install-WindowsFeature Server-Gui-Mgmt-Infra Server-Gui-Shell -Restart
4) Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell -Restart
2) is the correct answer unless you are looking for a minimal server installation, If so then 3) would be the correct answer. 4) However does not work at all. the ( , ) throws it off between Server-Gui-Mgmt-Infra and Server-Gui-Shell
Shuel Khan
wrong- the book says 4 is the correct answer. The (,) is indeed correct.
Source: 70-410 book, Page 21.
“To add the full GUI to a Server Core computer, you must use Windows PowerShell to install
the same features you removed in the previous procedure. To convert a Windows Server 2012 R2
Server Core installation to the full GUI option, use the following Windows PowerShell command:
Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart
René Koopmann
22 out of 25 second time
René Koopmann
16 out of 25
Ase
10 out of 25 hmmm need to work much harder
Gazanfar Jafarov
i got 17 points out of 25 points total. 🙂
Angel Badillo
I want to thank you so much for putting this practice test together. Its really helping reinforce much of what I learned in class. I hope this tool continues to help us all achieve our goals for passing the exam.
abdul arhman
Thank you very much! I will use this during the preparations to real exam
Wafiullah
that is very good thank you.
Eleven
What PowerShell command would you use to install the Hyper-V role on a computer running Microsoft Windows Server 2012?
1) Install-WindowsFeature -Name Hyper-V -ComputerName -IncludeManagementTools -Restart
2) Install-WindowsFeature HyperV -ComputerName -IncludeManagementTools -Restart
3) Install-WindowsFeature Hyper-V -IncludeManagementTools -Restart
4) Install-WindowsFeature -Name HyperV -ComputerName -IncludeManagementTools -Restart
1 and 3 both work…so both are correct?
Adam
“Hyper-V” and “HyperV” are not the same, only 1) works
Eleven
Not sure about the power shell command you use to set remote desktop:
set-remotedesktop -enable as this exam has it, does not work on my server…however this does….set remotedesktop enable ???????????
Sean_Baiden
I got 18 out of 25 ; not bad for someone who stopped learning for 4 months.
grzech
Thank you very much.
tjw1276
Need more STUDY TIME!!!
Renato
Thank you very much! I will use this during the preparations to real exam
Brian Zavala
What is with this website? I went through the test once and then wanted to run through it again and now the start exam button is gone. Three different browsers even another computer and still no way to start the exam. Also why does every link across the top of your website just lead to an ad?
Brian Zavala
What is with this website? I went through the test once and then wanted to run through it again and now the start exam button is gone. Three different browsers even another computer and still no way to start the exam. Also why does every link across the top of your website just lead to an ad?
Brian Zavala
What is with this website? I went through the test once and then wanted to run through it again and now the start exam button is gone. Three different browsers even another computer and still no way to start the exam. Also why does every link across the top of your website just lead to an ad?